|
|
|
|
|
|
CA-5 Knuckle Heavy Weight Tranfer Hinge - ETH
|
|
|
The Energy Transfer Hinge (ETH) is the ideal way to pass low voltage power from the hinge jamb to the lockset without having any exposed wires. These hinges are commonly used with electric mortise & cylindrical locks, electric strikes (when on a pair of doors), electric exit trims, latch pullback devices, door mounted card readers and low voltage door lights. We can modify almost any hinge and we maintain a large inventory of most major hinge brands in various sizes and finishes. Contact us if what you need is not listed.
Configurations:
ETH2W: 2 Wire (20 gauge) - 4A@24V (per pair)
ETH4W/6W: 4/6 Wire (26 gauge) - 1A@24V (per pair)
ETH8W/1OW/12W: 8/10/12 Wire (28 gauge) - 1A@24V (per pair)
Configurations Available for Electric Latch Retraction:
ETH2WH: 2 Wire (18 gauge) - 5A (16 amp in-rush for 300 ms.)
ETH4WH - ETH12WH: 4 - 12 Wire (2 wires @ 18 ga. + 2-10 wires 28 ga.)
Features:
UL-F Rated
4' lead available at no extra charge
Center located wire access holes for easy installation (5 Knuckle std. wt.)
Non-conductive wire access cap for added wire protection
No hassle 3-Year Warranty
|
|
|
|
|
|
|
|
|
|
CA-3 Knuckle Heavy Weight Tranfer Hinge - ETH
|
|
|
The Energy Transfer Hinge (ETH) is the ideal way to pass low voltage power from the hinge jamb to the lockset without having any exposed wires. These hinges are commonly used with electric mortise & cylindrical locks, electric strikes (when on a pair of doors), electric exit trims, latch pullback devices, door mounted card readers and low voltage door lights. We can modify almost any hinge and we maintain a large inventory of most major hinge brands in various sizes and finishes. Contact us if what you need is not listed.
Configurations:
ETH2W: 2 Wire (20 gauge) - 4A@24V (per pair)
ETH4W/6W: 4/6 Wire (26 gauge) - 1A@24V (per pair)
ETH8W/1OW/12W: 8/10/12 Wire (28 gauge) - 1A@24V (per pair)
Configurations Available for Electric Latch Retraction:
ETH2WH: 2 Wire (18 gauge) - 5A (16 amp in-rush for 300 ms.)
ETH4WH - ETH12WH: 4 - 12 Wire (2 wires @ 18 ga. + 2-10 wires 28 ga.)
Features:
UL-F Rated
4' lead available at no extra charge
Center located wire access holes for easy installation (5 Knuckle std. wt.)
Non-conductive wire access cap for added wire protection
No hassle 3-Year Warranty
|
|
|
|
|
|
|
|
|
|
Storefront ETH Electric Transfer Hinge (Flat Dark Bronze)
|
|
|
Electric Hinge specifically manufactured with rounded corners for use with storefront system's flat dark bronze hinges. The flat dark bronze color matches the manufacturers hinges that are used so all the hinges will match. The electric hinges have 4 wires, 2 each 18 gauge wires rated at 5 amps and 2 each 26 gauge wire for signal if needed. 3 year warranty. UL listed.
|
|
|
|
|
|
|
|
|
|
Storefront ETH Electric Transfer Hinge (Brushed Stainless Steel)
|
|
|
Electric Hinge specifically manufactured with rounded corners for use with storefront system's stainless steel hinges. The brushed stainless steel finish matches the manufacturers hinges that are used so all the hinges will match. The electric hinges have 4 wires, 2 each 18 gauge wires rated at 5 amps and 2 each 26 gauge wire for signal if needed. 3 year warranty. UL listed.
|
|
|
|
|
|
|
|
|
|
Storefront ETH Electric Transfer Hinge (Gloss Dark Bronze)
|
|
|
Electric Hinge specifically manufactured with rounded corners for use with Vistawall, Coral and other storefront system's Regent gloss dark bronze hinges. The gloss dark bronze color matches the manufacturers hinges that are used so all the hinges will match. The electric hinges have 4 wires, 2 each 18 gauge wires rated at 5 amps and 2 each 26 gauge wire for signal if needed. 3 year warranty. UL listed.
|
|
|
|
|
|
|
|
|
|
CA- Power Transfer Pivot - ETH
|
|
|
The Energy Transfer Pivot Hinge is available in the same wire configurations s the butt hinges. It's a great way to pass power from the hinge jamb to the door and have no exposed wires or cords. We maintain an inventory of our own Command Access intermediate pivot hinge. We also modify other manufacturers pivots if sent to us.
Configurations:
ETH2W = 2(20ga) wire - 4A @ 24V (per pair)
ETH4W = 4(26ga) wire - 1A @ 24V (per pair)
ETH6W = 6(26ga) wire - 1A @ 24V (per pair)
ETH8W = 8(28ga) wire - 1A @ 24V (per pair)
ETH10W = 10(28ga) wire - 1A @ 24V (per pair)
Configurations for Electric Latch Pullback:
ETH2WH = 2(18ga) wire
ETH4WH = 2(18ga) + 2(28ga) wire
ETH6WH = 2(18ga) + 4(28ga) wire
ETH8WH = 2(18ga) + 6(28ga) wire
Features:
Non-conductive wire access cap for added wire protection
4' lead available at no charge
No hassle 3 year warranty
|
|
|
|
