Locksets

Home > Hardware > Locksets

Sort By:

Page of 1

DS1 Delay / Sequencer

Our Price: $156.00

The DS1 delay/sequencer board offers a switching network that is ideal for (de)energizing an electrified locking device then, after an adjustable time, activating an automatic door operator. It is also suitable for other timing functions such as door sequencing in one or both directions, or anywhere a timing relay is required. For Telephone Entry system applications, the DS1 offers a direct connection to the entry panel, simplifying wiring and eliminating the need for and isolating relay.
Features:

Bi-Directional sequencing mode
3 Adjustable delays, up to 30 seconds maximum
Easy potentiometer adjustments
LEDs for visual relay confirmation
Accepts wet or dry inputs
12 to 24V AC/DC
One shot design for security or maintained output for smoke evac
SPDT contacts rated at 3Amps @ 30VDC
Input for connection to phone
No hassle 3-Year Warranty

Specifications:

Size - 3 ¼” x 2 ¼” x ¾”
Mounting - Velcro or double-sided tape
Enclosure - Protective paper sleeve
Operating voltage - 12 / 24 Volts, AC / DC
Current Draw - 18 mA standby, 40 mA max
Response time - 0.3 seconds
Inputs - 2 Wet + 2 Dry contacts: (3-30 V AC/DC, Optically isolated, non-polarity sensitive)
Relay Output - 2 x Form C (SPDT)
Relay contact rating - 3 amps @ 20 VDC
Time Delays - DOR #1 1 to 30 seconds; DOO #2 1 to 30 seconds; DOR #2 1 to 30 seconds
Electrical Life - 100,000 operations @ rated capacity; 500,000 operations @ ½ rated capacity

SW3 Power Supply for Mortise and Cylindrical Locks

SW3 Power Supply for Mortise and Cylindrical Locks

Our Price: $165.00

SW3 The SW3 power supply is a low cost, regulated switching power supply designed to supply power to low current DC devices such as mortise locks, cylindrical locks and electric strikes. The SW3 supplies a continuous 2.4A @ 27VDC and offers (3) non-fused outputs. The unit is housed in an attractive, high-quality metal enclosure to ensure your project has the quality your customers have come to expect.

CA - Electrified Mortise Lockset Command Access ML1

CA - Electrified Mortise Lockset Command Access ML1

Our Price: $485.00

The Command Access ML1 series lock offers the quality and features found in premium-quality, domestically made ANSI grade 1 mortise locks, yet at a significantly lower cost. The electrification and part tolerance maintenance is done here in the USA to ensure CAT’s high quality standards are met. The ML1’s chassis and trim are compatible with the Schlage “L” series locks so retrofitting to Schlage prep is never a problem.

Models Available:

ML180 (storeroom) – Outside lever locked (EL) or unlocked (EU) electronically. Latchbolt retracted by key outside or lever inside. Switched power allows outside lever to retract latchbolt. Inside lever is always free for immediate egress.

ML182 (institutional) – Outside and inside levers simultaneously locked (EL) or unlocked (EU) electronically. Latchbolt retracted by key on either side. Switched power allows both levers to retract latchbolt.

ML170 (classroom) – Outside lever locked (EL) or unlocked (EU) electronically. Latchbolt retracted lever on either side unless outside has been locked by key. Switched power allows outside lever to retract latchbolt. Inside lever is always free for immediate egress.

ML1480 (entry w/deadbolt) – Outside lever locked (EL) or unlocked (EU) electronically. Latchbolt and deadbolt retracted by key outside or lever inside. Switched power allows outside lever to retract latchbolt and deadbolt. Inside lever is always free for immediate egress.

ML1485 (privacy w/deadbolt) - Outside lever unlocked (EU) electronically. Latchbolt and deadbolt retracted by key outside or lever inside. Switched power allows outside lever to retract latchbolt unless deadbolt is thrown. Inside lever is always free for immediate egress. Available in EU (electronically unlocked) function only

Trims Available: L3, L6, L17 with 2-7/16" rosettes

Finishes available: 613, 625, 626
Features:

UL Listed
Continuous duty solenoids allow for “continuously on” applications such as Fail Safe or an unlock cycle
Plug-in bridge rectifier that allows for an AC or DC power source
Low current draw
Compatible with Schlage “L” series mortise trim.
No hassle 3-Year Warranty

Options:

Available Fail Safe (Electrically Locked) or Fail Secure (Electrically Unlocked)
Voltage options - 12V or 24V(AC/DC)
REX - Request to Exit or AE switch available
LBM - Latchbolt Monitor switch available
DPS - Door Position switch available
DBM - Deadbolt Monitor switch available
SLM - Solenoid Monitor switch available
SCM - Security Monitor switch available
CRU2 - Current Reduction Unit to improve solenoid life in “continuously on” applications
CRU2i - The intelligent CRU2: automatically detects DC input voltage between 12 to 30 volts and converts it to operate our 12V locks. Additionally, it adjusts the current to the solenoid allowing the lockset to run cooler and last longer without any manual adjustments.

Specifications:

Operating Voltage – 12 or 24VAC/DC (+or- 10%) (must specify 12 or 24 volts when ordering)
Amperage – 12V = 700 mA / 24V = 350mA
Solenoid coil resistance – 12V = 18 Ω 24V = 69 Ω
Power consumption – 8 watts

CA - Electrified Mortise Lockset Cal Royal

CA - Electrified Mortise Lockset Cal Royal

Our Price: $510.00

The Command Access electrified version of the Cal-Royal “M” series mortise lock line allows for remote keyless access and egress control for heavy use applications where security and safety is critical. These locks may be purchased as special order complete locks or as modifications only (add MD prefix for modification only of customers’ M8080 lock bodies). Along with the styles and finishes listed below, we offer multiple functions and voltages to meet your requirements. Common applications include stairwell doors, lobby entrances, computer rooms, classrooms, interior and exterior doors. The electrified mortise lock allows remote keyless access and egress control for heavy use applications where security and safety are critical. Common applications include stairwell doors, lobby entrances, computer rooms, classrooms and exterior doors. This Mortise lock may be purchased as a modification only of customers’ lock.

Models Available:

MDML8080 (storeroom) – Outside lever locked (EL) or unlocked (EU) electronically. Latchbolt retracted by key outside or lever inside. Switched power allows outside lever to retract latchbolt. Inside lever is always free for immediate egress.

MDML8053 (entry w/deadbolt) – Outside lever locked (EL) or unlocked (EU) electronically. Latchbolt and deadbolt retracted by key outside or lever inside. Switched power allows outside lever to retract latchbolt and deadbolt. Inside lever is always free for immediate egress.

Trims Available: call to verify

Finishes available: call to verify
Features:

UL Listing
CSFM Listing
Continuous duty solenoids allow for “continuously on” applications such as Fail Safe or an unlock cycle
Plug-in bridge rectifier that allows for an AC or DC power source
Low current draw
No hassle 3-Year Warranty

Options:

Available Fail Safe (Electrically Locked) or Fail Secure (Electrically Unlocked)
Voltage options - 12V or 24V(AC/DC)
REX - Request to Exit or AE switch available
LBM - Latchbolt Monitor switch available
DPS - Door Position switch available
CRU2 - Current Reduction Unit to improve solenoid life in “continuously on” applications
CRU2i - The intelligent CRU2: automatically detects DC input voltage between 12 to 30 volts and converts it to operate our 12V locks. Additionally, it adjusts the current to the solenoid allowing the lockset to run cooler and last longer without any manual adjustments.

Specifications:

Operating Voltage – 12 or 24VAC/DC (+or- 10%) (must specify 12 or 24 volts when ordering)
Amperage – 12V = 700 mA / 24V = 350mA
Solenoid coil resistance – 12V = 18 Ω 24V = 69 Ω
Power consumption – 8 watts

CA - Electrified Mortise Lockset Command Access ML1 LPB180

CA - Electrified Mortise Lockset Command Access ML1 LPB180

Our Price: $715.00

The Command Access LPM180 mortise lock utilizes a high quality Grade 1 chassis built to withstand years of abuse. This unique model brings latch retraction to a standard mortise lockset. Requiring no special door prep, this is the perfect solution for push-pull conditions, handicap access, and for automatic operators where panic devices are not necessary. The LPM180 takes advantage of out patented PM200 technology, allowing for favorable wire runs and multiple locks on one power supply. It is field handible and available in Fail Secure (EU) functionality. This mortise lock uses standard ‘type 86’ door prep and can retrofit to Schlage L9000 compatible trim. We offer this model as chassis only or with complete trim.

Models Available:

LPM180 (storeroom) – Latchbolt retracted electronically (EU), by key outside or by lever inside. Switched power retracts latchbolt for push/pull operation. Outside lever always rigid. Inside lever always free for immediate egress.

Trims Available: L3, L6, L17 with 2-7/16" rosettes

Finishes available: 613, 625, 626
Features:

No special lock prep required – fits standard mortise pocket prepped for a Schlage “L” series lock
Utilizes our patented PM/PWM200 technology
Circuitry allow for momentary or continuously on “push/pull” applications
May be controlled by Command Access PS1N, PS5-4 and PS5-6 power supplies
Available is complete locksets or in chassis only (retrofits to Schlage “L” series compatible trim)
No hassle 3-Year Warranty

Specifications:

Operating Voltage – 24VAC/DC (+/- 10%)
Surge Current Amperage - 12A for 200ms@24V
Holding Current Amperage - 250mA@24V
Solenoid coil resistance – 1.75 Ω
Power consumption – 8 watts voltage - 24VDC

CA - Electrified Mortise Lockset Best 45

CA - Electrified Mortise Lockset Best 45

Our Price: $750.00

The Command Access electrified versions of the Best 45H series mortise lock lines allow for remote keyless access and egress control for heavy use applications where security and safety is critical. The 45H Series locks may be purchased as complete locks. Along with the styles and finishes listed below, we offer multiple functions and voltages to meet your requirements. Common applications include stairwell doors, lobby entrances, computer rooms, classrooms, interior and exterior doors.

Models Available:

ML45D (storeroom) - Outside lever locked (EL) or unlocked (EU) electronically. Latchbolt retracted by key outside or lever inside. Switched power allows outside lever to retract latchbolt. Inside lever is always free for immediate egress.

ML45W (institutional) - Outside and inside levers simultaneously locked (EL) or unlocked (EU) electronically. Latchbolt retracted by key on either side. Switched power allows both levers to retract latchbolt.

ML453DEL/EU (entry w/deadbolt function) - Outside lever locked (EL) or unlocked (EU) electronically. Latchbolt and deadbolt retracted by key outside or lever inside. Switched power allows outside lever to retract latchbolt and deadbolt. Inside lever is always free for immediate egress.

Trims Available: 03, 14, 15

Finishes available: 626

* Handing required & limited stock
Features:

UL Listing
CSFM Listing
Continuous duty solenoids allow for “continuously on” applications such as Fail Safe or an unlock cycle
Plug-in bridge rectifier that allows for an AC or DC power source
Low current draw
No hassle 3-Year Warranty

Options:

Available Fail Safe (Electrically Locked) or Fail Secure (Electrically Unlocked)
Voltage options - 12V or 24V(AC/DC)
REX - Request to Exit or AE switch available
LBM - Latchbolt Monitor switch available
DPS - Door Position switch switch available
CRU2 - Current Reduction Unit to improve solenoid life in “continuously on” applications
CRU2i - The intelligent CRU2: automatically detects DC input voltage between 12 to 30 volts and converts it to operate our 12V locks. Additionally, it adjusts the current to the solenoid allowing the lockset to run cooler and last longer without any manual adjustments.

Specifications:

Operating Voltage – 12 or 24VAC/DC (+or- 10%) (must specify 12 or 24 volts when ordering)
Amperage - 12V = 700 mA / 24V = 350mA
Solenoid coil resistance - 12V = 18 Ω 24V = 69 Ω
Power consumption – 8 watts