|
|
|
|
 |
FLP-UL-M-KIT Electric Latch Retraction Kit for Falcon 24/25 series Devices Motor Driven
|
|

The FLP-UL-M-KIT is a practical and cost-effective way to convert a mechanical Falcon 24/25 series device to an electrified latch pullback device. The retrofit kit will maintain all UL listings on the device and for peace of mind is backed by CAT’s 3-year no hassle warranty. It easily hooks onto the back-activating bracket, in a matter of seconds. The only hole you’ll need to drill is for the wire raceway. PTS allows for a smooth post-installation adjustment of the latch/latches. A built-in REX switch comes standard on all unites! Last but not least, it features an updated MM4S module with 3 different energy consumption settings from energy conscious to high torque to get the tough jobs done!
|
|
 |
|
|
|
|
 |
CRLP-UL-M-KIT Electric Latch Retraction Kit for Cal Royal 98 Series Devices Motor Driven
|
|

The CRLP-UL-M-KIT is a
practical and cost-effective way to convert a mechanical Cal Royal 2200/9800
series exit device to an electrified latch pullback device. This easy-
to - install, motor-driven kit utilizes MM2
technology that allows the installer to power the device with virtually
any 1A ( or greater) 24VDC, regulated power supply, eliminating the need
for a typically expensive specialty power supply.
|
|
 |
|
|
|
|
 |
CYLP-UL-M-KIT Electric Latch Retraction Kit for Corbin Russwin 4000/5000 Yale 7100/7200 Exit Device Motor Driven
|
|

The CYLP-UL-M-KIT is a practical and cost-effective way to convert a mechanical Corbin Russwin’s ED4000, ED5000 or Yale 7000 series (7100/7200) exit device to an electrified latch pullback device. This easy-to-install, motor-driven kit utilizes MM2 technology that allows the installer to power the device with virtually any 1A ( or greater) 24VDC, regulated power supply, eliminating the need for a typically expensive specialty power supply.
|
|
 |
|
|
|
|
 |
SLP-UL-M-KIT Electric Latch Retraction Kit for Sargent 8000 Series Devices Motor Driven
|
|

The SLP-UL-M-KIT is a practical and
cost-effective way to convert a mechanical Sargent 8000 series exit device
to an electrified latch pullback device. This easy- to - install,
motor-driven kit utilizes MM2 technology that allows
the installer to power the device with virtually any 1A (or greater)
24VDC, regulated power supply, eliminating the need for a typically
expensive specialty power supply.
|
|
 |
|
|
|
|
 |
LLP-UL-M-KIT Electric Latch Retraction Kit for Hager 4500, LSDA 9000 & Lawrence 8000 Series Devices Motor Driven
|
|

The LLP-UL-M-KIT is a practical and cost-effective way to convert a mechanical Hager 4500, LSDA 9000 & Lawrence 8000 series device to an electrified latch pullback device. The retrofit kit will maintain all UL listings on the device and for peace of mind is backed by CAT’s 3-year no hassle warranty. It easily attaches to the dogging tail and is secured with (2) screws, in a matter of seconds. The only hole you’ll need to drill is for the wire raceway. PTS allows for a smooth post-installation adjustment of the latch/latches. Optional built-in REX switch is available! Last but not least, it features an updated MM4S module with 3 different energy consumption settings from energy conscious to high torque to get the tough jobs done!
|
|
 |
|
|
|
|
 |
PD10-UL-M-KIT Electric Latch Retraction Kit for AHT 4/5, Dor-o-matic/Falcon 1690/1790, & First Choice 3600/3700 series Devices Motor Driven
|
|

The PD10-UL-M-KIT is a practical and cost-effective way to convert a mechanical AHT 4/5, Dor-o-matic / Falcon 1690/1790, & First Choice 3600/3700 series exit devices to an electrified latch pullback device. The retrofit kit will maintain all UL listings on the device and for peace of mind is backed by CAT’s 3-year no hassle warranty. PTS allows for a smooth post-installation adjustment of the latch/latches. Last but not least, it features an updated MM4S module with 3 different energy consumption settings from energy conscious to high torque to get the tough jobs done!
|
|
 |
|
|
|
|
 |
PD25-UL-M-KIT Electric Latch Retraction Kit for Cal-Royal 77 or PD26 series Devices Motor Driven
|
|

The new PD25-UL-M-KIT is a practical and cost-effective way to convert a mechanical Cal-Royal 77 or PD26 series device to an electrified latch pullback device. The retrofit kit will maintain all UL listings on the device and for peace of mind is backed by CAT’s 3-year no hassle warranty. It easily secures onto the back-activating bracket and is secured with (2) screws, in a matter of seconds. The only hole you’ll need to drill is for the wire raceway. PTS allows for a smooth post-installation adjustment of the latch/latches. Last but not least, it features an updated MM4S module with 3 different energy consumption settings from energy conscious to high torque to get the tough jobs done.
|
|
 |
|
|
|
|
 |
VLP-UL-M-KIT Electric Latch Retraction Kit for Von Duprin 33/35 & 98/99 series exit device Motor Driven
|
|

The VLP KIT Series
is a practical and cost-effective way to convert a mechanical Von Duprin
33/35 & 98/99 series exit device to an electrified latch pullback
device. This easy- to - install, solenoid driven kit from
Command Access utilizes our module technology which allows for
centralized power supplies and extended wire runs up to 700’ with 18/2
wire.
|
|
 |
|
|
|
|
 |
ARLP-UL-M-KIT Electric Latch Retraction Kit for Adams Rite 8200, 8400, 8600 & 8800 Exit Device Motor Driven
|
|

The new ARLP-UL-M-KIT is a robust, groundbreaking field installable motorized latch retraction kit for Adams Rite 82/84/86/88 series exit devices. It utilizes a custom ball screw assembly and CAT designed custom stepper motor to maximize the pulling force in a package small enough to fit inside all Adams Rite 8000 devices with no clearance issues.. The only hole you’ll need to drill is the raceway! It utilizes our PTS “Push to Set” technology making post-installation adjustments incredibly easy. Watch the video! You’re gonna love it!
|
|
 |
|
|
|
|
 |
PD15-UL-M-KIT Electric Latch Retraction Kit for Jackson 1285/1295 & PD16 series Devices Motor Driven
|
|

The new PD15-UL-M-KIT is a robust, groundbreaking field installable motorized latch retraction kit for Jackson 1285/1295 & PD16 series exit devices. It utilizes our patent pending custom ball screw assembly and CAT designed custom stepper motor to maximize the pulling force in a package small enough to fit inside all devices with no clearance issues.. The only hole you’ll need to drill is the raceway! It utilizes our PTS “Push to Set” technology making post installation adjustments incredibly easy.
|
|
 |