Home > Hardware > CA - Electrified Mortise Lockset Cal Royal
Alternative Views:	Our Price: $510.00 Product Code: CA-EML--CAL-ROYAL Color*: First, Select Color                      Keyway*: Then, Select Keyway                      Switch Options*: Then, Select Switch Options                      Lockset Trim*: Then, Select Lockset Trim                      Lockset Function*: Then, Select Lockset Function                      Qty:

Description   The Command Access electrified version of the Cal-Royal “M” series mortise lock line allows for remote keyless access and egress control for heavy use applications where security and safety is critical. These locks may be purchased as special order complete locks or as modifications only (add MD prefix for modification only of customers’ M8080 lock bodies). Along with the styles and finishes listed below, we offer multiple functions and voltages to meet your requirements. Common applications include stairwell doors, lobby entrances, computer rooms, classrooms, interior and exterior doors. The electrified mortise lock allows remote keyless access and egress control for heavy use applications where security and safety are critical. Common applications include stairwell doors, lobby entrances, computer rooms, classrooms and exterior doors. This Mortise lock may be purchased as a modification only of customers’ lock. Models Available: MDML8080 (storeroom) – Outside lever locked (EL) or unlocked (EU) electronically. Latchbolt retracted by key outside or lever inside. Switched power allows outside lever to retract latchbolt. Inside lever is always free for immediate egress. MDML8053 (entry w/deadbolt) – Outside lever locked (EL) or unlocked (EU) electronically. Latchbolt and deadbolt retracted by key outside or lever inside. Switched power allows outside lever to retract latchbolt and deadbolt. Inside lever is always free for immediate egress. Trims Available: call to verify Finishes available: call to verify Features:    UL Listing    CSFM Listing    Continuous duty solenoids allow for “continuously on” applications such as Fail Safe or an unlock cycle    Plug-in bridge rectifier that allows for an AC or DC power source    Low current draw    No hassle 3-Year Warranty Options:    Available Fail Safe (Electrically Locked) or Fail Secure (Electrically Unlocked)    Voltage options - 12V or 24V(AC/DC)    REX - Request to Exit or AE switch available    LBM - Latchbolt Monitor switch available    DPS - Door Position switch available    CRU2 - Current Reduction Unit to improve solenoid life in “continuously on” applications    CRU2i - The intelligent CRU2: automatically detects DC input voltage between 12 to 30 volts and converts it to operate our 12V locks. Additionally, it adjusts the current to the solenoid allowing the lockset to run cooler and last longer without any manual adjustments. Specifications:    Operating Voltage – 12 or 24VAC/DC (+or- 10%) (must specify 12 or 24 volts when ordering)    Amperage – 12V = 700 mA / 24V = 350mA    Solenoid coil resistance – 12V = 18 Ω 24V = 69 Ω    Power consumption – 8 watts Related Items CA- Power Transfer Pivot - ETH CA - Electrified Mortise Lockset Best 45 CA - Electrified Mortise Lockset Command Access ML1 LPB180 CA - Electrified Mortise Lockset Command Access ML1 Our Price: $360.00 Our Price: $750.00 Our Price: $715.00 Our Price: $485.00 CA-3 Knuckle Heavy Weight Tranfer Hinge - ETH CA-5 Knuckle Heavy Weight Tranfer Hinge - ETH DS1 Delay / Sequencer Our Price: $190.00 Our Price: $190.00 Our Price: $156.00

Share your knowledge of this product. Be the first to write a review »