Home > Hardware >

CA - Electrified Mortise Lockset Command Access ML1
CA - Electrified Mortise Lockset Command Access ML1


 
Our Price: $485.00


Product Code: CA-EML--COMMAND-ACCESS-ML1


Color*:

Keyway*:

Switch Options*:

Lockset Trim*:

Lockset Function*:

Qty:  
Description
 
The Command Access ML1 series lock offers the quality and features found in premium-quality, domestically made ANSI grade 1 mortise locks, yet at a significantly lower cost. The electrification and part tolerance maintenance is done here in the USA to ensure CAT’s high quality standards are met. The ML1’s chassis and trim are compatible with the Schlage “L” series locks so retrofitting to Schlage prep is never a problem.

Models Available:

ML180 (storeroom) – Outside lever locked (EL) or unlocked (EU) electronically. Latchbolt retracted by key outside or lever inside. Switched power allows outside lever to retract latchbolt. Inside lever is always free for immediate egress.

ML182 (institutional) – Outside and inside levers simultaneously locked (EL) or unlocked (EU) electronically. Latchbolt retracted by key on either side. Switched power allows both levers to retract latchbolt.

ML170 (classroom) – Outside lever locked (EL) or unlocked (EU) electronically. Latchbolt retracted lever on either side unless outside has been locked by key. Switched power allows outside lever to retract latchbolt. Inside lever is always free for immediate egress.

ML1480 (entry w/deadbolt) – Outside lever locked (EL) or unlocked (EU) electronically. Latchbolt and deadbolt retracted by key outside or lever inside. Switched power allows outside lever to retract latchbolt and deadbolt. Inside lever is always free for immediate egress.

ML1485 (privacy w/deadbolt) - Outside lever unlocked (EU) electronically. Latchbolt and deadbolt retracted by key outside or lever inside. Switched power allows outside lever to retract latchbolt unless deadbolt is thrown. Inside lever is always free for immediate egress. Available in EU (electronically unlocked) function only

Trims Available: L3, L6, L17 with 2-7/16" rosettes

Finishes available: 613, 625, 626
Features:

   UL Listed
   Continuous duty solenoids allow for “continuously on” applications such as Fail Safe or an unlock cycle
   Plug-in bridge rectifier that allows for an AC or DC power source
   Low current draw
   Compatible with Schlage “L” series mortise trim.
   No hassle 3-Year Warranty

Options:

   Available Fail Safe (Electrically Locked) or Fail Secure (Electrically Unlocked)
   Voltage options - 12V or 24V(AC/DC)
   REX - Request to Exit or AE switch available
   LBM - Latchbolt Monitor switch available
   DPS - Door Position switch available
   DBM - Deadbolt Monitor switch available
   SLM - Solenoid Monitor switch available
   SCM - Security Monitor switch available
   CRU2 - Current Reduction Unit to improve solenoid life in “continuously on” applications
   CRU2i - The intelligent CRU2: automatically detects DC input voltage between 12 to 30 volts and converts it to operate our 12V locks. Additionally, it adjusts the current to the solenoid allowing the lockset to run cooler and last longer without any manual adjustments.

Specifications:

   Operating Voltage – 12 or 24VAC/DC (+or- 10%) (must specify 12 or 24 volts when ordering)
   Amperage – 12V = 700 mA / 24V = 350mA
   Solenoid coil resistance – 12V = 18 Ω 24V = 69 Ω
   Power consumption – 8 watts

Share your knowledge of this product. Be the first to write a review »
Signup for our Newsletter